Timebar not moving and “Void” Log Issue for Denon Home support

[storaid]

Dear Tiki,

Thank you very much for your continued development of TuneBrowser.

I would like to ask about the current support status of Denon Home Speakers.

In earlier versions of TuneBrowser, I confirmed that playback with Denon Home Speakers worked correctly.

Currently, while playback is still possible, I have noticed that the time bar (progress bar) does not move properly during playback.

I checked the logs and found the following repeated messages:

UPnP_P: [Proc:RelTime ] <POL>: Elapsed: xx:yy:zz -> aa.bb / cc.dd sec (Void)

It keeps returning “Void,” which surprised me.

To verify, I tested with version 5.5.0 and found that the related messages were normal — no repeated “Void” logs appeared.

Have you dropped support for Denon Home in recent versions of TuneBrowser?

Thank you very much for your attention.

Please let me know if you need more information.

[storaid]

Hello Tiki,

As a follow-up to my previous message, I decided to conduct a version-by-version test regarding the Denon Home playback issue.

Here are my findings:

– In version 5.5.0, the timebar function works correctly with Denon Home

– Starting from version 5.6.x, the timebar no longer moves during playback

– In version 5.7.x as well, the timebar still does not operate properly

This result surprised me.

It seems that there might have been a major change in the UPnP functionality starting from version 5.6.x, which could be related to this issue.

I hope this information helps.

Thank you again for your continuous efforts.

[投稿者]

投稿