再生できない

[ahomankai]

TuneBrowserを4.2.4から使用しようとしているのですが、曲を再生することが出来ません。

OSはwin7です。

TuneBrowserをインストールして試しに1曲読み込ませて再生したところ、再生と停止を繰り返すようにな感じになり音楽を止めることもできなくなります。（音源はMP3とflacで確認。）

TuneBrowserを閉じてもう一度再生すると、「デバイスの停止を検出しました」と表示させ全く再生されなくなりました。

何が問題なのでしょうか、、

わかる方がおられましたら何卒よろしくお願いします。

 

2018/01/16 22:47:48,122.794: Preparing fade.
2018/01/16 22:47:48,122.808: Fade out.
2018/01/16 22:47:48,122.819: Enter fade control.
2018/01/16 22:47:48,124.255: Opening tune 0 [C:\Users\\Desktop\フォルダー\09 Chapter 9.mp3]
2018/01/16 22:47:48,124.515: Creating decoder for file [C:\Users\\Desktop\フォルダー\09 Chapter 9.mp3]
2018/01/16 22:47:48,124.535: Creating MP3 decoder.
2018/01/16 22:47:48,124.596: Opening file with RAMDecode:No : C:\Users\\Desktop\フォルダー\09 Chapter 9.mp3
2018/01/16 22:47:48,125.280: No Xing header.
2018/01/16 22:47:48,125.386: This is CBR. Found 1729 frames.
2018/01/16 22:47:48,125.510: MP3 codec is FFmpeg.
2018/01/16 22:47:48,130.920: Opened file: C:\Users\\Desktop\\09 Chapter 9.mp3
2018/01/16 22:47:48,130.930: 1 Sample:32 bit, 1 Word:32 bit.
2018/01/16 22:47:48,133.712: Stage: [PrepareDevice]
2018/01/16 22:47:48,133.809: — Preparing device for 44100 Hz: [Generic Low Latency ASIO Driver]
2018/01/16 22:47:48,133.881: Auto resampler: [デバイスが対応していない場合]
2018/01/16 22:47:48,133.942: — Try 1/8: Preparing device by [PCM] 44100 Hz.
2018/01/16 22:47:48,133.984: ASIOProxyProcess: Call : [Confirm] Param:0
2018/01/16 22:47:48,134.157: ASIOProxyProcess: Done : [Confirm] Result:1 Wait:0
2018/01/16 22:47:48,134.209: ASIOProxyProcess: Call : [Prepare] Param:0
2018/01/16 22:47:48,187.418: ASIOProxyProcess: Event: [PrepareBuffer] Param:35304
2018/01/16 22:47:48,187.773: ASIOProxyProcess: Done : [PrepareBuffer] Result:1
2018/01/16 22:47:48,187.855: Prx: 2018/01/16 22:47:48,134.535: Requesting sample mode: PCM (Device has no IOType).
2018/01/16 22:47:48,187.880: Prx: 2018/01/16 22:47:48,134.547: Requesting sample rate: 44100 Hz.
2018/01/16 22:47:48,187.905: Prx: 2018/01/16 22:47:48,134.616: Device CH Output:2, Input:2.
2018/01/16 22:47:48,187.919: Prx: 2018/01/16 22:47:48,134.633: Allocating ASIO buffer CH:2 Size:882.
2018/01/16 22:47:48,187.928: Prx: 2018/01/16 22:47:48,134.641: Calling ASIODriverCreateASIOBuffers_SEH_Wrapper.
2018/01/16 22:47:48,187.940: Prx: 2018/01/16 22:47:48,187.031: Calling ASIODriverCreateASIOBuffers_SEH_Wrapper completed.
2018/01/16 22:47:48,187.950: Prx: 2018/01/16 22:47:48,187.037: Allocating ASIO buffer OK.
2018/01/16 22:47:48,187.959: Prx: 2018/01/16 22:47:48,187.071: Driver stage: [Initialized] -> [Prepared ]
2018/01/16 22:47:48,187.969: Prx: 2018/01/16 22:47:48,187.107: Safe wait time: 10 ms, Preferred: 20.000 ms, Buffer: 20.000 ms
2018/01/16 22:47:48,187.979: ASIOProxyProcess: Done : [Prepare] Result:2 Wait:0
2018/01/16 22:47:48,188.015: ASIOProxyProcess: Call : [Confirm] Param:1
2018/01/16 22:47:48,188.184: Prx: 2018/01/16 22:47:48,188.086: ASIO driver 1: [Generic Low Latency ASIO Driver].
2018/01/16 22:47:48,188.193: Prx: 2018/01/16 22:47:48,188.093: ASIO driver DSD support: DSDLevel::Native (Keep current by user request)
2018/01/16 22:47:48,188.201: Prx: 2018/01/16 22:47:48,188.099: ASIO driver sample mode: PCM only.
2018/01/16 22:47:48,188.209: Prx: 2018/01/16 22:47:48,188.105: ASIO driver sample rate: 44100 Hz.
2018/01/16 22:47:48,188.219: Prx: 2018/01/16 22:47:48,188.124: ASIO driver CH: Input:2 Output:2.
2018/01/16 22:47:48,188.228: Prx: 2018/01/16 22:47:48,188.136: ASIO driver format: ASIOSTInt16LSB.
2018/01/16 22:47:48,188.240: Prx: 2018/01/16 22:47:48,188.139: ASIO driver format: 2 bytes.
2018/01/16 22:47:48,188.290: ASIOProxyProcess: Done : [Confirm] Result:1 Wait:0
2018/01/16 22:47:48,188.333: ASIOProxyProcess: Call : [Confirm] Param:0
2018/01/16 22:47:48,188.447: ASIOProxyProcess: Done : [Confirm] Result:1 Wait:0
2018/01/16 22:47:48,188.688: Device word:16 bit, Device Data:16 bit, Tune word:32 bit, Buffer:882 words.
2018/01/16 22:47:48,188.723: Device tick:20.000 ms / 50.000 Hz.
2018/01/16 22:47:48,188.736: PrepareDevice result: OK
2018/01/16 22:47:48,188.789: — Try 1/8: Preparing device completed.
2018/01/16 22:47:48,188.801: Device sample rate is fixed: 44100 Hz.
2018/01/16 22:47:48,190.941: Stage: [StartDevice]
2018/01/16 22:47:48,193.124: ASIOProxyProcess: Call : [Start] Param:0
2018/01/16 22:47:48,223.345: Prx: 2018/01/16 22:47:48,193.298: Buffer ahead: 2
2018/01/16 22:47:48,223.361: Prx: 2018/01/16 22:47:48,222.969: Starting ASIO driver: [Generic Low Latency ASIO Driver].
2018/01/16 22:47:48,223.380: Prx: 2018/01/16 22:47:48,223.001: Calling ASIODriverStart_SEH_Wrapper.
2018/01/16 22:47:48,223.414: Prx: 2018/01/16 22:47:48,223.294: Calling ASIODriverStart_SEH_Wrapper completed.
2018/01/16 22:47:48,223.424: Prx: 2018/01/16 22:47:48,223.298: Driver stage: [Prepared ] -> [Running ]
2018/01/16 22:47:48,223.447: ASIOProxyProcess: Done : [Start] Result:1 Wait:0
2018/01/16 22:47:48,223.598: Fade in.
2018/01/16 22:47:51,258.569: Stop playback because of DeviceStall.
2018/01/16 22:47:51,258.874: Error: Device callback is not comming while 3065 ms (> 3000 ms).
2018/01/16 22:47:51,258.901: Proc: [Stop]
2018/01/16 22:47:51,259.337: Error: デバイスの停止を検出しました.

[Tiki]

ahomankaiさん、こんばんわ。

つけていただいたログを拝見したかぎりでは、デバイスに開始制御をかけたもののコールバックが呼び出されず、約3秒待って、デバイスが停止したと判断しています。

ご利用のASIOドライバ「Generic Low Latency ASIO Driver」は、Steinberg のソフトウェア製品に付属のもののようですが、ご利用のデバイスのオリジナルのWASAPIまたはASIOドライバを使われた場合はどうでしょうか?

Steinberg はASIOの開発元ですが、ハードウェア製品含めてどうもASIOドライバの挙動が不可解なところがあり(OEM供給を受けているヤマハもですが)、過去にもうまく動作しない事例がありました。

[投稿者]

投稿